Mind Blowing Geyser Maintenance Tips for Approaching Winters

 So winter is on the way and the most important home appliance at home is Geyser. So today we are talking about how you can maintain your Geyser so that it can run a long way and some mind-blowing Geyser Maintenance Tips for approaching winters.

In an earlier blog, we have given you an idea of How to buy the best Geyser according to your need. Now we are going to tell you how you can maintain the same. Like any other electrical appliance, Geyser also required some maintenance to make it run hassle-free for a longer period of time.

Although you cannot avoid small wear & tear but you with small Geyser maintenance Tips and related steps can extend the life of your Geyser.

So here is the list for keeping proper maintenance of your Geyser:

Geyser Maintenance Tips:

Switch off the Geyser when not in Use

We are human and we have a tendency of forgetting small things. As it looks a small thing to switch off the geyser but it creates a lot of impact in terms of your electricity bill and also extends your geyser life.

Keep the geyser on for a longer time, put strains on the parts and low down the life of your geyser and frequent on & off also, create problems for a longer time.

Nowadays geysers are advanced enough to get you hot water in just 5 minutes or so. So try avoiding geyser switches on for a longer period of time and only use it when required.

Always keep the temperature on a lower side

As far as human skin concern, it would be safe to keep the temperature under 45 degrees Celsius and not more than that. It will be safe for you and your kids, otherwise, higher temperatures can give burn your skin easily.

By putting the temperature in a lower side also helps you to save electricity and it gives less strain to your geyser.

Change your Anode Rod in every few years

Anode Rod is a sacrificial part in your geyser and it helps your geyser not to corrode easily.  This Rod is basically made from magnesium and delivers electron in the geyser tank and creates an environment where the water component reacts with ROD first and that’s how it helps the geyser anti-corrosive.

So make sure to check your anode rod while doing regular maintenance and also get it to change in between 2-3 years.

Always use Metal pipes with plastic ones

It is recommended to use metal pipes because of hot water. As in some cases, the plastic is vulnerable to heat water and also changes the same if you find some white deposit from hard water.

Keep an eye on electrical wiring & plug

Low capacity of wiring and plug allows the equipment to short-circuited and makes it easy to burn.

So it is always better to use proper plugs and wires and try using MCB instead of using normal switches.

In the end, Annual Maintenance

Now if you don’t have that much time then you can book an expert on RepairAdda by calling them at 92102-23456 or you can also visit them at www.repairadda.com. Currently, they are providing seamless service in Noida & Greater Noida and you can also download the RepairAdda app from the play store.

Now I am hoping that your Geyser maintenance related issue will be solved with the Best Geyser Repair Service.